Ruckus Zonedirector Change Ip Address Cli, It is a powerful and popular wireless LAN controller. It offers many features for managing and configuring wireless networks. In this post, we’ll show you how to modify the IP address of a Ruckus ZoneDirector using the CLI.
Ruckus Zonedirector Change Ip Address Cli
If you need to modify the IP address of your Ruckus ZoneDirector, the process is straightforward. You need to use the CLI (Command Line Interface).
First, connect to your ZoneDirector via SSH and log in with your admin account.
Once you’re logged in, enter the following command to view the current IP address:
get management-ip-address
This will display the current IP address of the ZoneDirector. To change it, use the following command:
Set management-ip-address x.x.x.x (replace x.x.x.x with the new IP address)
Finally, reboot your ZoneDirector for the changes to take effect:
How to change the IP address of a Ruckus ZoneDirector
If you need to modify the IP address of your Ruckus ZoneDirector, you can do so using the Command Line Interface (CLI). To access the CLI, you will need to connect to the ZoneDirector via SSH. Once you are logged in, you can use the following commands to change the IP address:
> set system ip
> set system netmask
> set system gateway
After entering these commands, you will need to reboot the ZoneDirector for the changes to take effect.
Using the Command Line Interface
The foremost thing you need to do is open a command line interface (CLI) on your computer. The most comfortable way to do this is by opening the Terminal application.
Once you have the CLI open, you will need to connect to the ZoneDirector via SSH. To do this, enter the following command:
ssh admin@10.0.0.1
You will be prompted for the password. Once you have entered the password, you will be logged in to the ZoneDirector.
Next, you need to enter the following command to change the IP address of the ZoneDirector:
set ipaddr 10.0.0.2/24
This will change the IP address of the ZoneDirector to 10.0.0.2 with a subnet mask of 255.255.255.0 ( /24 ).
Finally, you need to reboot the ZoneDirector for the changes to take effect:
Changing the IP address in the Web GUI
If you need to modify the IP address of your Ruckus ZoneDirector, you can do so via the Web GUI. To do this, log into the ZoneDirector and navigate to the System tab. From here, click on the IP Configuration section, and you will be able to modify the IP address, subnet mask, default gateway, and DNS settings. Once you have made your changes, click on the Save button to apply them.
Conclusion
The process for changing the IP address of a Ruckus ZoneDirector through the command line interface is relatively simple. First, you’ll need to connect to the ZoneDirector via SSH and then issue the ‘set ip’ command. Once you have done this, you can simply enter the new IP address that you want to use and hit Enter. The changes will take effect immediately, and your ZoneDirector will be reachable at the new IP address.
Leave a Reply